There are several types of polishing machines:
1, blade polishing machine
During the processing of the blade polishing machine blade, due to various reasons, the blade margin may be uneven, even if the margin is too thick or too thin on a workpiece, if the conventional machine is used for polishing, The operator's personal safety poses a hazard. a blade polishing machine comprising a five-axis transmission machine tool, wherein the five-axis transmission machine tool is provided with a C-axis servo motor and a power head rotating shaft, and both ends of the power head rotating shaft 5 are mounted on the support, The support is connected to the power head, the power head has a bracket, the bracket is fixed with a belt motor and a driving shaft, and the belt motor of the belt motor is provided with a belt, and the belt is equipped with the belt Spherical belt pulley. This product is used for blade polishing.
2, mold polishing machine
The mold polishing machine adopts imported high-power devices, and the power is increased by 30% compared with similar products. Microcomputer-controlled resonant frequency automatic seek and lock function; CNC nine-segment vibration size and discharge gap tracking adaptation function. Mold polishing machine Scope: various molds (including cemented carbide molds) complex cavity, narrow slot slits, blind holes and other rough surface to mirror polishing. Can polish a variety of metals, glass, jade, agate and so on.
3, metallographic polishing machine
The metallographic polishing machine motor is fixed on the base, and the taper sleeve for fixing the polishing disc is connected to the motor shaft through a screw. The polishing fabric is fastened to the polishing disk by a ferrule, and after the motor is turned on by the switch on the base, the sample can be manually pressed to polish on the rotating polishing disk. The polishing liquid added during the polishing process can be poured into the square plate placed beside the polishing machine through a drain pipe in a plastic tray fixed to the base. The polishing cover and cover prevent dirt and other debris from falling on the polishing fabric when the machine is not in use, which affects the use effect.
4, two station polishing machine
A two-station polishing machine comprising a frame, a polishing wheel, and a power unit; the polishing wheel is disposed on the frame, the polishing wheel is driven by the power unit; the disk surface of the polishing wheel comprises an outer fiber fabric; and the polishing machine has two Polishing discs, two polishing discs are flat disc and cam disc, respectively. The polishing machine of the utility model has a flat wheel disc and a cam disc. The user can conveniently and alternately use the flat wheel disc and the cam disc to manually polish the plane, convex surface and concave surface of the product surface, and the working efficiency is high.
5, flame polishing machine
The flame polishing machine adopts electrolyzed water technology to energize energy equipment for extracting hydrogen and oxygen gas from water. Among them, hydrogen is used as fuel, oxygen is used for combustion, and carbon-containing gas such as acetylene, gas, liquefied gas, etc. can be replaced, which has high calorific value and concentrated flame. Zero pollution, high production efficiency, convenient energy saving and so on. Suitable for carrying machines to the field environment. Suitable for precision crafts such as open flame welding, small casting, small part quenching annealing, various wire welding, high temperature material testing, etc. in jewelry factory, gold shop, dental department, glass and other industries.
6, automatic saw blade polishing machine
The automatic saw blade polishing machine is specially used for the polishing of the diamond saw blade base. It consists of a frame, a polishing machine mechanism, a robot mechanism, a dust removal mechanism, etc. The loading, unloading and polishing of the saw blade are completely controlled by the PLC, using the abrasive belt. The base of the diamond saw blade is polished. In the past, the base polishing of the saw blade was basically manually polished by the workers, and the working environment was very bad. The fully automatic polishing machine used the robot to automatically load and unload the saw blade. The worker only needs to place an appropriate number of saw blades and replace the abrasive belt in time. Let the machine run automatically, one person can operate multiple machines at the same time.
7, thin wall polishing machine
The thin-walled part polishing machine is composed of a motor drive mechanism, a crank drive mechanism, a reciprocating guide rod mechanism, a thin-walled member clamp, a thin-walled member clamping and polishing mechanism, a distribution box, and the like according to a transmission relationship between power and control. The thin-walled position fine-tuning mechanism automatically fine-tunes the spatial position of the thin-walled parts to control the displacement path according to the requirements of the mold profile and the specific processing path. The utility model has the advantages that the surface layer quality and the surface performance stability of the thin-walled parts are greatly improved, and the mechanization of the high-precision thin-walled parts polishing processing is realized in the process.
8, round tube polishing machine
The multi-circle tube polishing machine adopts the principle of non-heart grinding, which consists of two mechanisms: polishing and feeding. By adjusting the feed amount of the grinding head, the workpiece can be subjected to large-volume grinding or fine grinding and polishing. By adjusting the spacing of the guide wheels, It can process different workpieces of different specifications. The feeding mechanism of the machine adopts a stepless speed change device, which can achieve the ideal grinding and polishing effect by changing the feed speed of the workpiece. According to the different materials and polishing requirements of the workpiece, the polishing machine can be used to polish the workpiece by using various polishing tools such as abrasive cloth wheel, hemp wheel, cloth wheel and nylon wheel. The workpiece holder is made of wear-resistant material and can be adjusted without frequent adjustment. When the workpiece specification is changed and adjusted, the machine adopts the structure of “one-way moving in two-way position”, which greatly simplifies the pallet adjustment work. The complete production line consists of three parts: polishing machine, feeding device and discharging device. There are various models of standard, automatic, environmental and economical models for users to choose. The number of heads of the main machine can be specified according to the original condition of the surface of the workpiece and the finish of the surface of the finished product.